Make-Your-Own Parametric Mount Bracket
Print Profile(2)
Description
Generic parametric mounting bracket you can resize to fit almost any small device or object.
The preview image shows the three main dimensions you can change:
- Length – total distance between the two screw tabs
- Depth – how far the bracket extends under the object
- Height – how high the side wall goes up
There is also a parameter for the screw diameter, which supports flat-head / countersunk screws up to M8.
Important about tolerances:
- The screw diameter you enter is automatically increased by 0.2 mm to add clearance.
- All other dimensions (Length, Depth, Height, etc.) are applied exactly as you set them, so you should include your own tolerances in those values depending on your printer and use case.
The examples in the images are just sample uses; the model itself is not tied to any specific device.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)