Mouse Live Trap | Escape-proof and reliable

🔥 REVOLUTION: The Mouse Safe with Forced Trigger System (5h 10m Print)! The ALCATRAZ Live Mouse Trap solves all live trap problems at once. This system is designed for maximum reliability, hygiene, and most importantly, escape-proof security. With a print time of only 5 hours and 10 minutes, it is the fastest and safest solution

🛠️ Zero-Accessory Principle: 100% 3D Print Functionality

This is a decisive advantage over other designs. You need NO additional parts from the hardware store or your drawer:

• ✅ NO springs or rubber bands
• ✅ NO screws or metal pins
• ✅ NO strings or wires

All parts are completely printed and fit together positively. Simply plug together and done!

🛡️ Unbeatable Security (ALCATRAZ MAX-SECURE)

This system was designed against the cleverest and strongest mouse gangsters:

• 1. ESCAPE-PROOF WITH ULTIMATE BOLT: A subsequent vertical bolt mechanically blocks the door after triggering. No pushing up, no escape.
• 2. RELIABLE FORCED-TRIGGER BAIT SYSTEM: The separate bait container is strategically placed so that the mouse can smell and see the bait, but must step on the trigger and stretch to reach it. Triggering is guaranteed.
• 3. BITE-PROOF GRATES: The grates are designed to prevent gnawing and protect your fingers (protection for you, the trap, and the mouse).
• 4. ZERO-CONTACT HANDLE: The integrated handle on top allows for hygienic transport and release of the animal.

🧼 Hygiene and Cleaning Convenience

Cleaning is often the least pleasant part. Not here:

• Removable Mechanism: The inner seesaw simply rests loosely on an internal guide. It is not clipped in and can be completely removed with one motion.
• Optimized Drainage: The openings at the bottom extend to the lower edge to facilitate rinsing and drainage after cleaning.
• Disassemblable: The trap is quickly disassembled into its main components and cleaned.

⭐ Print Profile & 100% Support-Free All parts are optimized for the Bambu Lab A1 (0.4mm nozzle) and printable in just 5 hours and 10 minutes. The design requires no supports

🔧 Recommended Print Settings

• Material: PETG (recommended for durability and mechanics).
• Walls: 3 (Structurally sufficient).
• Infill: 15% Grid. (Note: For maximum long-term mechanical stability, an upgrade to 4 Walls and 25% Gyroid is recommended)
• Supports: no supports.

⚡ Bambu Lab Verified

Every design is perfected by me on the Bambu Lab X1C or A1. I optimize every model down to the last detail for FDM printing, extracting everything technically possible. Load, print, fits.

💎 Material Recommendation

I use Sunlu PETG/PLA – reliable and AMS-ready. 👉 Filament:   Here I order my filament (Affiliate Link) 

🛠️ Your idea as a 3D model?

Need an adjustment or a custom CAD design? Write to me directly!

💼 Commercial License & Exclusive

Selling physically? Get the Merchant License in my profile! B2B: I offer exclusive, unpublished models

 Contact me if interested.

❤️ Support

Like 👍 or Boost 🚀 help me immensely! ☕ Coffee: Buy me a coffee