Bmabu Lab SnowBreaker shield

I named this cool shield Snowbreaker because it's perfect for a snowball fight and brings every opponent to their knees…….

you can use the shield as a small protection or unfold the side shields to unleash its full protective capacity,

the handle on the back is large enough to fit any glove ….. I deliberately designed the handle to be a bit more angular to prevent constant slipping……. if you want, you can glue in 5x2 mm magnets to hold the side shields in place when folded (see pictures) …. The handle is screwed with 2 M5 screws …… on the back of the Bambu central shield     press in 2x M5 heatsinks…….   

You can also use the shield as an elevation for your fort if you open the side shields 45 degrees and tilt the shield slightly (see pictures)………

If you open the side shields 90 degrees, you can also use the shield as a base for a Capture The Flag game (see pictures)….

So you see, the shield is versatile and your children or you with your friends will certainly have a lot of fun with it…….

and of course, as always, have fun printing, I would also like to say something: when you print the side shields, remember to set 3 walls and infill to 20%, and if you are familiar with it, go into the layers and set the infill in the area of the side shields' rotation angle to 50% because plastic breaks faster in the cold, you can print the other parts with 2 walls and 8-10% infill……

and use 2K adhesive because superglue also breaks quickly at sub-zero temperatures……..