Whoville stand off - Hueforge 2 colours

Stand off in whoville - Who will win christmas? 

Just 2 colours 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.6mm

Filaments Used: 
    #000000 * PLA Sun lu Black  Transmission Distance: 0.1
    #ffffff * PLA sun lu white  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Sun lu Black
    At layer #11 (0.96mm) swap to sun lu white for the rest.