Thermometer Storage Case

Traditional mercury thermometer storage boxes. Currently, there are two common types of mercury thermometers: one is the most common small-scale glass mercury thermometer, for which I designed a box called T1. The other is a relatively newer large-scale mercury thermometer, available in both plastic and glass. The dimensions of this one are a bit complex, so I designed its box, called T2, based on the sizes I have on hand

Regardless of the thermometer type, they all come with a case when purchased. However, I found that the included cases are either very fragile, cracking and breaking easily, or their lids aren't secure enough. When stored in frequently used drawers, they often pop open because the lid isn't tight enough

For both T1 and T2, I designed two storage modes:

1. For direct storage without the original case, it's called T1/T2. It can only store the two mercury thermometer types mentioned above

2. For storage with the original case, it's called T1-AMP/T2-AMP. It can store not only thermometers but also small elongated items like tweezers, and blemish extractors

Installation method: When installing the flip lid, first align and insert one side, then firmly press the other side upwards from below to insert it

Precautions:

1. Mercury spilled from a broken mercury thermometer is toxic when it volatilizes. Please handle with care. Assess the model's feasibility yourself; you are responsible for the consequences of its use!

2. There might be issues of being too tight or too loose due to varying dimensions, different printing accuracies, filament sinkage rate, and other factors. If it's too loose, you can adjust the clamping buckle by heating it with a lighter. If it's too tight to even enter the opening, please do not force it to avoid danger. You can try printing again with a different filament brand or type. If it still doesn't work, you can leave me a message

3. The dimensions are designed to be quite compact, so please fully insert it and ensure no part of the casing protrudes before closing the lid!

4. For all print profiles of this model, plate 1 is single-color without an icon, and plate 2 is multi-color with an icon