Guitar Fret Caddy / Holder

Here is a fret caddy for organizing frets before install on a guitar or other fretted instrument. 

It has 24 slots, each of which are labeled in another color to keep different fret lengths from getting mixed up between cutting and install. The holes are also outlined in another color to make them easier to see. 

The holes themselves are all 3/16" OD and ¾" deep… though I could easily modify this if you need or want something different. 

The back shelf is there for some extra space… maybe an extra fret or a nut.

The bottom has 4 small holes in case you want to install some screw-on rubber feet. These holes are 1/16" OD x ½" deep and are located in from the edge by ¼". You could also use stick-on feet, cork, or nothing at all! The feet just help keep it from sliding around but your bench mat probably does that already.

Per user request, there are now 2 print profiles. The standard one is oriented as shown in the images and the “reverse” one is oriented such that the lowest numbers are on the bottom row.