PTFE Connector / Coupler & Strain Relief
Print Profile(8)
Description
Boost Me (for free)
Do you like the design?
If this connector has improved your setup, I would be thrilled with a rating and a boost 🚀! This helps me continue to develop useful parts for the community.
Happy Printing! 🖨️
Ultimate PTFE Connector with Compression Fitting
Do your PTFE tubes have play or come loose unintentionally? This self-printed PTFE Connector (Coupler) permanently solves the problem with a double-sided compression fitting.
Unlike simple push-fit connectors, this design uses conical compression rings (olives) that firmly grip the tube when screwed on, without obstructing flow. Perfectly suited for Bowden setups, AMS systems, or as an extension for standard 4mm PTFE tubes.
Features:
- 🔒 Extreme Grip: No slipping out of the tube thanks to the clamping mechanism.
- 🔄 Double-sided: Securely connects two tube pieces.
- 📎 Clip included: A separate clip for strain relief or frame mounting is included.
- 🛠 No accessories needed: 100% printed, no metal nuts required.
Print Recommendation:
- Material: PETG or PLA/ PLA+ (for better thread stability).
- Layer height: 0.2mm (important for clean threads!).
- Walls: 2-3 wall lines for stability.
- Infill: 12% for the compression rings (olives), 12% for the rest.
Assembly:
- Thread the cap nut onto the tube.
- Place the compression ring (taper towards the thread) onto the tube.
- Screw into the main body – finger-tight is enough!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)