HueForge Angela - Silent Hill 2

Here is a HueForge of an image from the game Silent Hill 2 (first version on PS2), of Angela with a tortured mind.

I find this scene particularly striking.. With the iconic music that accompanies it.

If you want to modify the dimensions, make sure to leave a thickness of 3mm. Possibility to change the frame color in Bambu Studio.. Just change the filament color starting from layer 28.

The precise dimensions are 250.07mm x 151.62 x 3mm. Suitable for a 256mm build plate like the A1 (for A1 Mini you should be able to reduce the dimensions but I haven't tested it, be careful to keep 3mm thickness).

Only 3 colors are needed. No waste (apart from filament change) and no purge tower needed.

43g in total for 3h50 of printing.

Here is the HueForge text file if you want the details:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 252.7x151.62mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Jade White
At layer #21 (1.76mm) swap to Blue Gray

This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.

Border Only Colors from here until the end.
At layer #28 (2.32mm) swap to Jade White for the rest.

A small comment, boost or rating is always appreciated :-)