Sybil's Dream Breaker from Pseudoregalia
Print Profile(1)
Description
Played Pseudoregalia and want Sybil's Lifesize Dream Breaker?
If so, you can print it for yourself right here! Designed in SolidWorks, the Dream Breaker is 53" x 25" and weighs around 4-5lbs. I glued it with Loctite super glue, which I strongly recommend for holding the Dream Breaker together. Printing time was approximately 60 hours, but that's really the only tricky part, since the assembly is quite simple.
IMPORTANT: Do not mix up the white hex beams. All of the smaller hex beams are on the bottom. The two larger hex beams are on the top. Another thing is that this print is not meant to be swung or struck with anything. I purposely made the circular pins very strong when handling, but just be careful. If you want, you can change the Hex beams grid infill from 15% to 10% to make the Dream Breaker a little lighter.
- PLA was the only filament I used to print out the Dream Breaker.
- The holder_db is meant to help align the Dream Breaker's appendages easily when gluing and setting.
- Glue the parts together flat on a surface for the best results.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)