Search models, users, collections, and posts
Frenetic - Krampus Can Holder Collection
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 8% infill
Designer
15.9 h
1 plate
Open in Bambu Studio
Boost
22
45
8
2
28
11
Released
Description
Krampus can holder Collection - Frenetic Krampus
- Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
- Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Automatic (28°) supports, blocked supports around teeth (pic below)
- Just use my profile:)
- Be very careful when removing supports around teeth and fingers especially. My tip - use Silk PLA - Supports are easier to remove.
- Free licence
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
Happy printing:)
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (8)