martin.taichl

cover

2023-09-25_j900mpfw9jpa.jpg

2023-09-25_tx0wkg2zpndo.jpg

2023-09-25_36ih34myn6mo.jpg

2023-09-25_08h3i3qwe649.jpg

2023-09-25_8066hrt58jyz.jpg

2023-09-25_vnu5ko5jdt3a.jpg

2023-09-25_m5z555te8oe0.jpg

2023-09-25_s7a8ag7r1uz7.jpg

2023-09-25_jq2bmxe3a7my.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

plate_14.png

plate_15.png

OPTIONAL - Feet - any color - 1

plate_16.png

OPTIONAL - Feet - any color - 2

plate_17.png

plate_18.png

OPTIONAL - Feet

plate_19.png

plate_20.png

plate_21.png

Silver

plate_22.png

plate_23.png

plate_24.png

plate_25.png

plate_26.png

plate_27.png

plate_28.png

plate_29.png

plate_30.png

plate_31.png

plate_32.png

plate_33.png

plate_34.png

plate_35.png

plate_36.png

Cédric Walter

IMG_5992.jpeg

IMG_5991.jpeg

IMG_5990.jpeg

IMG_5987.jpeg

IMG_6006.jpeg

IMG_6005.jpeg

IMG_6004.jpeg

IMG_6003.jpeg

IMG_6002.jpeg

<ul><li>print with support the &nbsp;tallest building, with small surface on bed, add brim or it will failed (adhesion issues)</li></ul>

0.2mm layer, 2 walls, 15% infill

Stand (optional)

Engines

Base Parts

2nd Level plus pins and connectors

2nd Level plus pins

Pylon bottom 1

Pylon bottom 2

Pylon bottom 3

Pylon middle 1

Pylon middle 2

Pylon middle 3

Small pylon 1

Small pylon 2

Small pylon 3

Pylon top 1

Pylon top 2

Pylon top 3

Small pylon top

Inter-pylon platform and center detail pieces

Center core 3rd level pieces

SGA Building 1, 2, 3, 4, 5

SGA Building 6, Dome, Small Tower, Big Tower

Tower 2, 3, 4, 5, 6, 7, 8, 9

Uncle Coz

atlantis1.jpg

atlantis2.jpg

atlantistowers.jpg

.12mm layer height, single color, scaled to 60% of original size to fit the A1 Mini build volume. I had some issues at first with auto-supports being turned on, which caused many of the window slits in the buildings to be filled in. I switched supports to manual, and only painted them onto the bottom section of the upper main tower piece. As you can see by the side-by-side photos of the first and second upper main tower pieces, the lack of supports makes the windows come out great. (Without supports is on the left, with supports on the right. You can see how the supports clogged the windows and would not come out.) Every building came out great on the second test prints.  The project has 27 build plates. You can probably combine parts into fewer plates, this setup makes it easier to track where you are in the assembly process, at least for me.

60% scale for A1 Mini, single color, .12mm layer height

This is my model of the Atlantis as seen in Stargate Atlanis tv series.  Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you do not need to tinker with the data at all. It is once again a kit so everything fits together like a puzzle and no glue is needed.  For the easier assembly, please watch the following playlist where the assemble process is described in detail.   <figure class="media"><oembed url="https://youtu.be/XK6CV58Kxcw"></oembed></figure>&nbsp;The model comes with a stand though in the end I decided to not use it and display it as it is.  Hope you like it.

Print Profile(2)

Description

Comment & Rating (127)

License

Remixes (3)

Related Models

Atlantis From Stargate Atlantis