Multi-Functional DVD/GAME Case Bracket - Free 3D Print Model

Search models, users, collections, and posts

Shop Therapy

Household>Decor

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 15% infill

Designer

5.9 h

3 plates

5.0(23)

Open in Bambu Studio

Boost

201

485

421

184

Released

Description

I designed these brackets for storing/displaying DVD & Gaming Cases. I have tested DVDs, Xbox360, PS4, and Wii games. Any case that is the same size will work. I'm not positive about BlueRay cases, and Switch cases are too small. If there is enough interest, I will design a bracket to fit those different sizes - just shoot me a message or comment.

You can screw these to the wall in a variety of orientations (will need to hit a stud and/or use drywall anchors). You can also print the Left and Right brackets to make it free-standing when attached together. The free-standing version can also be attached to the wall. Each shelf/bracket will hold 8 DVD/Game cases.

I have also added a little plug that can be printed and inserted into any of the unused screw-holes, if you feel the need.

If you want to print the free-standing version, you will need to print a Right & Left bracket. The screw holes are off-set from each other, so you cannot attach two rights or two lefts together. The holes are offset to make it easier to get a screwdriver in there to attach to the wall, and the offset screw holes also creates a stronger connection.

Comment & Rating (36)

@Stegpen

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

would have done five but I don’t see the need for a brim on the part just wastes filament

The profile uploader has replied

@dfreshkremer

I added the brim because without it the corners were lifting off the bed and ruining the print. The "brim waste" is minimal. Thanks for the review, those look great! Do they seem to be strong enough for you?

(Edited)

@Stegpen

Boosted

Replying to @dfreshkremer :

sorry if i came off a bit rude there it sounds like your having leveling issues tho

(Edited)

@dfreshkremer

Replying to @Stegpen :

Not sure what the issue was. I have a P1S, so it auto levels.

(Edited)

@user_2136560791

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

Print was perfect, and looks great stacked and mounted on a wall

@SPC99

Nice set up!!!!

@sajmon162

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

U made my day 😉

The profile uploader has replied

@dfreshkremer

that looks so good!! thanks for sharing your print! did you use drywall anchors? Does it seem sturdy enough for you?

@sajmon162

Boosted

yeah its ok but I had to modify project for a1 mini with supports

(Edited)

@Cable3306

Print Profile

0.2mm layer, 4 walls, 15% infill

Great design I had to change the brim settings in slicer cuz they were way too big was a waste of filament did it without the brim and so far so good So if you're going to print it just think about doing it that way unless you have bed adhesion issues

@Doc_DETH

Print Profile

0.2mm layer, 4 walls, 15% infill

Worked a treat, I expanded them a bit, extended the screw holes on happy accident, made them a tiny bit adjustable. I also printed in different colors. 8 more to go, then I will have a 10th of my collections hanging up! Great simple minimalist design, sturdy enough and holds box sets (small) up as well!

@ford_capri_83

Print Profile

0.2mm layer, 4 walls, 15% infill

nice and easy design

@cliveysaur

do you have a version for Nintendo Switch game cases?

The designer has replied

@dfreshkremer

I do not! I only have this one version! Maybe I'll make a version that you can resize to whatever you want.

@cheffe_bastelt

From the idea point of view, exactly what I'm looking for, I need something like this but "infinitely" expandable in width. I own well over 400 games and am currently looking for a solution that offers a lot of space but doesn't consume truckloads of filament

The designer has replied

Show original

@dfreshkremer

I will see about making it wider for you!

@zephtech

this thing is simple, and yet masterfully designed. I almost thought that the slight lip at the bottom was a hiccup from my printer, but no, it was put there to make sure the media cases don’t slip out, and yet you wouldn’t even notice it without close inspection. Bravo. thanks for the screw hole plugs by the way, something often overlooked.

@user_2366224817

Print Profile

0.2mm layer, 4 walls, 15% infill

the Games fit perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.