as always this rocked! perfect print! I'm adding a led to the sphere for a better effect. 

user_2456317514

Easiest Print - 0.16mm layer, 2 walls, 15% infill

Took a few days and a good amount of filament,  but turned out great.  only criticism is that rear engines did not fit on pegs.  I had to cut the pegs off and just glue the engines on.  I like my color choices.  printed on an a1 mini,  so I had to cut some pieces to make it all fit.

user_1458634881

Très beau vaisseau, impression facile et montage sans colle  ! Rendu pas mal et au top avec une petit olight sphère au centre :) voir photo 

A truly beautiful vessel, easy to print and glue-free assembly! The result is quite impressive, especially with a small spherical light in the center :) see photo

mikadeejay

Lucie 3D

n0n1cK

PROMETHEUS PRINTS 3D

0.16mm layer, 2 walls, 15% infill

Praise to the Oris ! It sits on top of my P1S, awesome !

Faesarn

Ein überraschend schönes Modell, obwohl ich es anfangs gar nicht drucken wollte, da die Ori mir nicht so gut gefallen. Einzig beim slicen gab es wohl ein paar Probleme, da sich im schönen weiß leider an einigen Stellen das grau untergemischt hat und so nicht schön sauber aussieht. Ansonsten problemloser Druck und top Ergebnis! Genervt haben mich nur die zwei Antriebsteile am Heck, die musste ich mit Gewalt an ihren Platz bringen, da sie einen Tick zu groß ausgefallen sind für dort.

A surprisingly beautiful model, although I initially didn't want to print it because I didn't like the original so much. The only issue was during slicing, as unfortunately, some gray mixed into the beautiful white in a few spots, making it not look perfectly clean. Otherwise, a problem-free print and an excellent result. The only thing that annoyed me were the two drive parts at the back; I had to force them into place because they turned out a touch too large for that spot

AdAstra84

domdom

martin.taichl

cover

2023-09-25_1cp9dtkng2fk.jpg

2023-09-25_ip1nytvssul3.jpg

2023-09-25_b3tfyx0mcwf5.jpg

2023-09-25_9p2oydvy40yg.jpg

2023-09-25_mx1k2skz1833.jpg

2023-09-25_ekb1gz2t9blp.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

IMG_7459.JPEG

2024-09-02_27f355105554c

_(1).2024-09-02_a3f97af8e35f4

_(2).2024-09-02_86beb60569b78

_(3).2024-09-02_b206e32e827aa

_(4).2024-09-02_8ae2237cb4d84

_(5).2024-09-02_e90249a3cd2b4

_(6).2024-09-02_12a1aee283ebe

_(7).2024-09-02_f1bf6a1439e1

_(8).2024-09-02_eab64c1351f2a

Changed orientations and grouped parts by color and faster printing times.&nbsp;

plate_10.png

plate_11.png

plate_12.png

soerenk

tempImagenp8Xq7_391582b8-4f59-413c-a93e-593d5a2bf6d0.webp

tempImageMzE0kB_ff1f8a18-205d-449e-8741-c73eb334ef97.webp

plate_1.webp

plate_10.webp

plate_11.webp

plate_12.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_7.webp

plate_8.webp

plate_9.webp

This is Mark II of the Ori Mothership from Stargate. Visually the model looks much like the MKI, but it is redesigned in a way, that the only painting required is the engine glow. All the other parts are printed separately. It is one again a kit and it does not require a single drop of glue. Though the assembly is relatively easy, I still recommend to wath the assembly video. <figure class="media"></figure> Hope you will like it. Happy printing ;)

Ori Mothership MKII

ASIA

Print Profile(2)

Description

Comment & Rating (21)

License

Related Models