RXM Full Size Grip Module Open Beta

DISCLAIMER: This is considered an OPEN BETA! I overbuilt the model for safety and heft but I don’t have the huge support network like the big names do, so please reach out if you’d like to share your results, have questions or concerns, or anything else! I’m on FB, IG, X, Discord, Makerworld… I’d love to see your build! I’d love to see your build! Constructive criticism is welcome.

THIS IS NOT A FRAME, IT IS A GRIP! Follow your local laws but this is not governed under the same rules as a normal frame/lower due to the FCU being the serialized part.

RG3D RXM Full Size Open Beta

I wanted a full size RXM grip panel in ODG so I made one. That is all. I did my typical Gonz pattern, included a blank, STEP files, and even a blender file that should be set up, ready to go, if you want to make your own texture. 
https://www.youtube.com/watch?v=CFkaEls5hVM

Print with lots of walls, full infill, rails up, tree supports… RXMs like rails up for the internal FCU related geometry.

BOM
1x) RXM
1x) Glock/rxm mag release spring

Assembly
Assembly is no different than any other grip module. See RXM instruction manual. One of the easiest 3D2A build out there in my opinion. Helpful Tips: Install slide lock spring first. Use a punch/allen wrench from the opposite side to line up the square sided hole with some leverage and carefully push in the pin, it can walk. Then push the rear pin in to lock the FCU in place. Removed the need to use the takedown spring.

Accreditations
Chairmanwon - RXM Staged Hardware
https://odysee.com/@chairmanwon:a/RXM_Chairmanwon:7