Rainbow Wax-Candle - Negative Mold
Print Profile(2)
Description
This is a negative mold for casting your own “rainbow” designer candle with two wicks and a diameter of 35 or 45 mm.
You will need:
- M5x45 / M5x55 screws and nuts
- Wax
- Candle wicks
- Color, if desired
Procedure:
1. Heat the wax in a water basin and add color.
2. Prepare the mold: rub cooking oil into the mold, place the wicks in the mold, and screw the mold together with screws.
3. Pour the wax over the opening.
4. Allow the wax to cool at room temperature (do not refrigerate) and keep refilling the wax (wax contracts).
5. Once the wax has hardened (2-3 hours), open the mold and remove the candle (if you have trouble removing it, use a knife to lever it out from the bottom of the candle).
Info:
The mold is not identical to the print profile, as filament savings were made afterwards. The candle profile is identical to the one in the pictures.
!!!Do not light the candle in the mold or on flammable substrate.!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)