H2S Extruder Gear / Wheel Sharingan - 21 Versions

~~~~~~~~~~

Edit 1: Added a short version. For some people it seems, that the original verison is to long and the printhead cover doesn't fit anymore. Thanks for the hint, @Printealo3D.tu

Edit 2: Made the fit on the shaft more precise. It's now a relatively tight fit. Be sure it's mounted the right way and is not tilted.

Thanks for the push, @Mronkine

~~~~~~~~~~

I made these sharingan exrtuder wheel spinners after I saw some of the other models on here. I didn't know if the A1 Versions would fit my H2S and I also wanted some of the more special sharingan versions. So I took some measurements, trained my CAD skills and here they are. 

They are printed flat with the sharingan on the build plate so you get a smooth finish. I would recommend to try, that the printer is starting to print with black, because black has the more finer details that could get covered when printing red first. I used a 0.4mm nozzle and I think they look great, but you could get even better results with the 0.2mm nozzle. I used 5 walls so there is no solid infill on the first layer.

Maybe I overdid it with 5x0.2mm layers with red, but I didn't want to have the black shining through the red. 

Following 21 versions are included:

Single Tomoe

Double Tomoe

Triple Tomoe

Rinne-Sharingan

Baru

Fugaku

Hikari

Indra

Itachi

Izuna

Madara

Madara Eternal

Naka

Naori

Obito, Kakashi

Rai

Sarada

Sasuke

Sauke Eternal

Shin

Shisui

Have fun!

So there is only one thing left to say:

Have fun!