Mounting plate - Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder by Trigger82

Trigger82

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1E

P1S

P1P

X1 Carbon

0.2mm layer, 3 walls, 15% infill

Designer

4.6 h

2 plates

4.8(11)

Open in Bambu Studio

Boost

215

503

137

Released

Description

Edit - I have Removed the Joiner plate from the 3mf file and have added different test clearance STL pieces and then the complete corresponding joiner plates to allow better compatibility for different machines.

Hopefully this fixes the tightness issue some people are having

Need something simple and compact to keep your Rewinder separated on the desk while you use it, then collapse it for storage if you dont have room for a solid one piece mount.

The sliding dovetails are snug but can be slid together via hand.

Printed in BL lava grey PLA-Cf

You may need to play with the support settings in the .3mf file as I was playing around with support filament for this print.

(note the actual base plate for the Donar and Main are designed to fit from the original version)

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS by Miklos Kiszely | Download free STL model | Printables.com

Comment & Rating (17)

@vk5fadl_bigkev

Print Profile

0.2mm layer, 3 walls, 15% infill

nice print bit tie to put together but works now to build my spool widener .. thanks

(Edited)

@user_1091696544

Print Profile

0.2mm layer, 3 walls, 15% infill

print was perfect and works great, thank you

@keen.idea3346

Print Profile

0.2mm layer, 3 walls, 15% infill

everything printed nicely on PLA. dovetail joints are a bit tight but that's not really an issue.

The designer has replied

@Trigger82

Hi Keen, Thanks for the feedback. Just curious on "How" tight the joints were for you? as I'm wondering if I need to edit it a little. With mine sitting on the desk it did take some effort to slide them together, but I never needed to tap/hammer at it since the goal was to make it removable without regretting the task.

@FaultyTowels

Replying to @Trigger82 :

Just printed these and I'm struggling to join them. Currently trying to shave the joints down quite a bit to get it to fit.

@Trigger82

Replying to @FaultyTowels :

Thank you for the feedback, I'll be implementing changes soon to give some choices to the clearance's with little test pieces to print