All Miraculous Rings + Box

My nephew is crazy about this series and asked me to make the Miraculous rings. I wasn't satisfied with any of the existing models as they required supports, AMS, or in any case, were not what I was looking for

I therefore decided to create them from scratch, trying to make them as simple to print as possible

All elements print without supports on any printer. The only piece that requires AMS is the top of the box, but only if you also want to create the lettering. I have also uploaded a version without lettering so that it can be printed by those who do not have an AMS

I grouped the ring symbols to reduce the number of colors needed, however, you can print them using more precise shades by printing them individually

Some additional information:

• The box is closed with 8 magnets 8x3 mm
• The rings have an inner diameter of 16 mm
• You can modify both the magnet and ring dimensions using the customization settings or the Fusion 360 file
• In the customization settings, all measurements are in millimeters
• The symbols should fit snugly into the ring slot and should not require glue. However, you can add it if you want to be more certain they won't fly off
• I have uploaded the Fusion 360 file to allow for customization. If you change the ring size, the box size will adapt, so do not use the already uploaded ones!
• The details in the symbols are very small, if possible, print them with a 0.2mm nozzle!
• The Fusion 360 file is quite messy, sorry!

I hope this project makes anyone who finds it useful happy!