Wall mount test lead cable holder
Print Profile(1)
Description
This wall mount test lead cable holder is an ideal solution for anyone who wants to organize their test cable spaghetti in their electronics lab at a fraction of the costs compared to the overpriced “professional” metal bracket.
It’s ideal for:
4mm banana test leads / DMM test leads
BNC cables / Oscilloscope probes
Tiny alligator test cables
USB Cables
Network cables
See also picture’s when used in practice.
The distance between the slots guarantee sufficient clearance between the cables such that if you take 1 you do not pull out any other cable from the rack.
Also the raised tip at the end of slot helps to keep the cables in place.
The dimensions are as following:
Dimensions: 250mm width, 120mm depth and 30mm high
Horizontal slot length: 90mm (excluding raised tip)
Slot width: 6mm
Distance between sloths: 17.3mm
Mounting hole diameter: 4.5mm (x3)
The test lead cable holder as shown in the pictures are printed using the default PLA setting with the following modifications.
Number of walls: 4
Infill: 25%
Infill pattern: Gyroide
Ironing: Top layer, flow setting of 30%
With these settings each slot can hold up to 6 silicone 4mm test leads of 1 meter length without bending.
If you like it, please download and boost the model!
Thank you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)