Snapmaker U1 Hula Adapter

I was always very enthusiastic about the Hula system. I had it on all Bambu Lab printers.

Since I always had the problem that they tended to oscillate on the cabinet (4 printers running at full speed), the print quality often suffered.

Unfortunately, I couldn't find a Hula for the U1. So I built a quick and simple version here.

A U1 Hula Adapter!

Here, the original Hula system is simply used, and instead of the normal connector to the printer, my part is used. Of course, the adapter can also be used with an existing Hula system. Simply print it and replace the one part.

Link to the original: https://makerworld.com/de/models/417509-hula-v1-0-anti-vibration-feet-for-3d-printers?from=search#profileId-502144

The H2D can simply be placed on top of this without having to remove the original feet. I also tested the direct connection variant, but I achieved better results this way.

I now have about 90 print hours with the system behind me, and it works perfectly. The print quality has also slightly improved.

Because the printer's oscillation is drastically reduced, the slight layer shifts have visibly decreased.

I hope you like it as much as I do :D

Here's my version for the H series from Bambu:

https://makerworld.com/de/models/1452515-bambu-lab-h2d-h2s-h2c-hula-anti-vibration-feet#profileId-1513401