Mecha-style large-capacity storage box organizer - segmented opening, free partition combination - Free 3D Print Model

Search models, users, collections, and posts

Uncle DongJi With Little Junk

Tools>Organizers

IP Report

GIF

Print Profile(2)

All

P1S

H2D

H2S

X1 Carbon

P2S

H2D Pro

X1E

H2C

P1P

X2D

A2L

A1 mini

Large: 25.5X20.5X16.5CM

Designer

23.8 h

5 plates

4.9(10)

Small size (A1 mini printable): 17.5x14.5x11.5CM

Designer

12.7 h

5 plates

5.0(6)

Open in Bambu Studio

Boost

455

1398

353

114

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

1. Insert the 6 hinged structural parts of the top cover into the reserved mounting holes on the back panel of the case as shown in the diagram and reinforce with glue.2. Aside from the pins, glue other parts in place as shown in the pictures.3. Print the desired number of dividers, optional if not needed.4. For large base models, especially when printing in winter, prevent warping that could cause the nozzle to collide with the model and lead to print failure by: increasing bed temperature, using a low-temperature printing plate, and maintaining chamber or ambient temperature

Other Practical Mecha-Style Items (Click image to jump)

Model Introduction:

Cool appearance, super large capacity, large size: 25.5X20.5X16.5CM Small size: 17.5X14.5X11.5CM
Segmented lid for easy access to frequently used items on the outside; 4 lid locking buckles ensure reliability during handling and movement
Freely combinable internal dividers to customize storage space as needed, keeping items neatly sorted and stored

Printing and Installation Instructions:

Insert the 6 hinged structural parts of the top cover into the reserved mounting holes on the back panel of the case as shown in the diagram and reinforce with glue
Aside from the pins, glue other parts in place as shown in the pictures
Print the desired number of dividers, optional if not needed
For large base models, especially when printing in winter, prevent warping that could cause the nozzle to collide with the model and lead to print failure by: increasing bed temperature, using a low-temperature stable printing plate, and maintaining chamber or ambient temperature

Comment & Rating (21)

@Mailing

Boosted

Print Profile

Small size (A1 mini printable): 17.5x14.5x11.5CM

This box is simply perfection in design and 3-D printing without support, a true masterpiece. Thank you very much for this beautiful STL. I look forward to more work from you. A little fun on the side, my wife asked what are the two?🤣🥳👍 will use the design for a 75,000 mA power bank

Show original

@HermitTabito

Printed it in Bambu PETG-HF Black and Overture PETG Gold. Turned out well.

@JayPrime

Boosted

Print Profile

Large: 25.5X20.5X16.5CM

I printed it with my almost empty filament spools and it came out great, putting it together was pretty easy, just have to pay attention to detail.

(Edited)

@user_1689977382

I printed the smaller one for my son and it was just a mess. half the pieces didn't fully fit, the small part to hold things in place for for the clips wouldn't go through or stay in place or click fit the whole it was supposed to go through... it was just a mess

The designer has replied

@DongJi

Hello, my friend, I used AI translation: There are plenty of successful prints shared in the Chinese region： https://makerworld.com.cn/zh/models/1839158-ji-jia-feng-da-rong-liang-chu-wu-xiang-shou-na-he#profileId-2034296 which shows the model file itself is fine—everyone uses the exact same file. As for why some people encounter issues when printing: Factors that affect printing and assembly tolerances: 1.Model file 2.Filament material 3.Printer (including print bed) 4.Ambient temperature Everyone uses the same model file. What differs are the other three variables. If the file itself was defective, everyone would fail. If others can print successfully but you are having tolerance or printer issues, please check the last three variables. The model file is a constant and cannot interfere with these factors — this is especially noticeable in winter.

@Uwe_062804

Boosted

Print Profile

Small size (A1 mini printable): 17.5x14.5x11.5CM

Congratulations on this perfect box. The print and appearance are perfect. The print went flawlessly. The surfaces are great. Since the print includes everything needed for joints and locking, the box is even better. Thanks for this design

Show original

@utkucaglar

1 kg of pla

@ArqueoFran

Boosted

Fun print, now it's time to assemble, let's see how it goes

Show original

@Antoniodelite

Print Profile

Large: 25.5X20.5X16.5CM

Fresh off the printer! The details on this model are insane!

@user_520237865

Print Profile

Large: 25.5X20.5X16.5CM

beautiful. well done 👏🏻

Show original

@user_2867384384

Boosted

Print Profile

Large: 25.5X20.5X16.5CM

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.