Santa looking at star
Print Profile(4)
Description
Santa looking at star
Two sizes 57x86mm and 115x172mm. Photo is the small size, printed with 0.2.
Print profiles for 0.2 and 0.4 nozzle, better with 0.2. Profiles for AMS and with pauses for color changes.
Hueforge information:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Swap Instructions:
Start with Charcoal (11101)
At layer #8 (0.72mm) swap to Maroon Red (10205)
At layer #13 (1.12mm) swap to Gold (10401)
At layer #23 (1.92mm) swap to Desert Tan (11401) for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)