Patrick1208

0.2mm layer, 2 walls, 15% infill

Berti213

xperts_avenue

cover

2025-11-29_2xpfioafzihp.jpeg

2025-11-29_8rfkks9rurjc.jpeg

plate_1.png

Unbenannt.PNG

<h2>🇩🇪 <strong>Beschreibung (Deutsch)</strong></h2><p>Abdeckung für einen Steuerkopf einer <strong>Simson S50, S51, S53 oder SR50</strong>, wenn keine Bowdenzüge durch den Steuerkopf geführt werden müssen.<br>Die Abdeckung wird idealerweise aus <strong>TPU</strong> gedruckt, sodass sie sich dank des leichten Konus in der Mitte sauber und fest über den Steuerkopf klemmen lässt.</p><h2>🇬🇧 <strong>Description (English)</strong></h2><p>Cover for the steering head of a <strong>Simson S50, S51, S53 or SR50</strong>, designed for setups where no Bowden cables need to pass through the steering head.<br>The cover is best printed in <strong>TPU</strong>, allowing it to securely clamp onto the steering head thanks to the slight taper in the center.</p>

<h2>🇩🇪 <strong>Description (German)</strong></h2><p>Cover for a steering head of a <strong>Simson S50, S51, S53 or SR50</strong>, if no Bowden cables need to be routed through the steering head.<br>The cover is ideally printed from <strong>TPU</strong>, so that it can be cleanly and firmly clamped over the steering head thanks to the slight taper in the middle.</p><h2>🇬🇧 <strong>Description (English)</strong></h2><p>Cover for the steering head of a <strong>Simson S50, S51, S53 or SR50</strong>, designed for setups where no Bowden cables need to pass through the steering head.<br>The cover is best printed in <strong>TPU</strong>, allowing it to securely clamp onto the steering head thanks to the slight taper in the center.</p>

Cover Steering Head Simson S50 S51 S53 SR50

ASIA

Print Profile(1)

Description

🇩🇪 Description (German)

🇬🇧 Description (English)

Comment & Rating (2)

License

Related Models