Satisfactory-Satisfactory-Refinery

The original model is extracted from the game Satisfactory, scaled 1:100 to the in-game size, a 0.2mm nozzle must be used throughout, and glue is required throughout

Note: Do not print directly

Note: Do not print directly

Note: Do not print directly

To prevent confusion due to too many parts, I divided the model into several large modules, with parts of different colors for each module placed on one plate. If you want to print, you need to re-arrange the plates by color yourself

The top wire mesh cannot be guaranteed to print perfectly, it might break, so it depends on luck. The inlet and outlet ports are very fragile, practically breaking on contact. I removed the ladders that couldn't be fixed on both sides. I tried disassembling parts in some areas but the effect was not good, and finally chose multi-color printing with filament changes. If you have any issues, leave a comment

Next, I will make the oil and power