Zootopia 2 Judy Hopps Articulated Figure

Zootopia 2 is out, here's Judy Hopps. Fully articulated with movable eyes.

First, here's an AMS multi-color print profile. If you don't like too much waste, you can wait two days, I'll release a simplified single-color version. You can also paint it after single-color printing.

There are also two replacement head sculpts (laughing and sad expressions), which you can download and print from my homepage:

Each part is named, you can view them in the slicing software and assemble according to the instructions.

Use filament to insert as axles for the elbow joints. It is recommended to clean any overhangs in the holes before insertion. Some parts are relatively small, please be careful when assembling. To ensure tight joints, some areas require a bit of force to assemble. Please pay attention to the direction of force when applying it to prevent breaking parts. Also, be careful when moving the joints, as this is not an industrial mass-produced product, and its strength is limited (even mature products from Bandai and Kaiyodo can have broken axles, broken joints, or loose joints).

I used Bambu Lab's PLA Basic filament to print and adjust the tightness of the joints. Please avoid using filaments with poor layer adhesion, such as Matte or Silk, on stressed parts, as they may break.

Due to differences in printers and filaments, the tightness of the printed joints may vary. Simple filing or applying a thin layer of super glue to increase thickness should allow for adjustment.

I've also made other things, feel free to check out my homepage:

P1S Lead Screw Protector