DRTekhne

cover

IMG_9043.JPG

IMG_9060.JPG

IMG_9052.jpeg

plate_1.png

2025-11-27_d624f928648c08.jpg

<p>Due to the increased size of the beads these changes reduced time from over 2.5 hours to around 1.3 hours without compromising integrity and allowing for a smoother bottom and top. These are best printed one at a time, watch for adhesion for the first layer until it starts the infill.</p><ul><li>Decreased infill to 10%, gyroid.</li><li>Increased maximum length to 30%.</li><li>Changed pattern on the top and bottom to concentric.</li><li>Removed smart scarf seam application.</li></ul>

300% scale, 10% gyroid infill

Pistachio

Big Kandi Pony Bead v2

<p>I enlarged the model substantially around 300% to around 4&#34; across, changed the infill to gyroid, made it 10% instead of 15%, and changed the pattern on the top and bottom to concentric to provide a smoother look on the P1S where the original was a bit squared off on the top.</p>

XL Pony Bead (~4 inches)

ASIA

Print Profile(1)

Description

Comment & Rating (26)

This remix is based on

License

Related Models