Mecha Pokemon Series - Mewtwo - Dummy 13 version

Mecha Pokémon Series – Mewtwo – Dummy 13 Version

This model is inspired by the Mecha Pokémon Series – Mewtwo Full Body Statue from @AT62 and has been created specifically to fit the Dummy 13 frame.
The figure has been rebuilt, segmented, and adapted to maintain the Mecha Mewtwo aesthetic while matching the proportions and articulation of the Dummy 13 system.

The goal was clean geometry, minimal support usage, and a smooth, reliable assembly process.

This version uses the standard Dummy 13 frame with a few intentional improvements:

• Lower arms replaced with calf parts for more accurate Mewtwo proportions.
  👉 Print 4 calf parts and no lower arm parts.
• Refined knee frame part for a more secure knee-cap fit.
• Extended, rounded clavicle/shoulder part for improved silhouette and stability.
• All required frame parts, both standard and modified, are included directly in the print profiles.

To offer increased poseability and durability, this model includes two complete frame profiles:

✔️ Complete Frame

The complete full frame for this figure. Should be printed in PETG.

✔️ Complete Frame (TPU Joints)

Same frame, but with TPU joints for flexibility and long-term durability.
Based on my earlier multimaterial Dummy 13 frame concept.
(Reference only — not required:
https://makerworld.com/en/models/1820713-truly-playable-dummy-13#profileId-1943424)

🧩 Key Features

• Designed for the Dummy 13 frame with targeted improvements
• Includes both standard and TPU-joint frame profiles
• Custom extended shoulder/clavicle part
• Improved knee part for better stability
• Calf parts used instead of lower arms (x4)
• All frame parts included in the print profiles
• Clean segmentation for painting and printing
• Optimized geometry with minimal supports
• Snap-fit assembly — no glue required

🛠️ Assembly

Assembly photos are included showing the full frame layout and how the armor attaches.
These images clearly show orientation and left/right placement.

Tips for the trickier steps:

Inner hip clavicle part
Attach the inner hip clavicle to the leg first.
It’s a tight press-fit, so using a small plier helps.
Once attached, mount the leg onto the hip frame.

Neck installation
Install the neck part after the head is in place, as it is easiest that way.

Tail clavicle
The tail clavicle can be pushed slightly deeper than the outer edge of the tail segment — this reduces the gap between the tail and the body.
Tube part
The tube parts should be clicked together and attached to the head and the upper back.

💬 Credits & License

Original Mecha Pokémon design style by @AT62.
This model is created in that style and adapted for the Dummy 13 system.

Shared under the Standard Digital File License.

I am an active subscriber to AT62’s highest-tier Commercial Membership, which permits both the commercial sale of physical prints and sharing this model as my own design under the Standard Digital File License.