openGrid Tape holder

Introduction:

Get your tapes sorted!

With these openGrid (standard 6.8mm) tape holders.

Made for standard 130mm diameter rolls.

Models for 1-4 rolls per size, the following sizes are available:

• 20mm
• 1"
• 40mm
• 50mm / 2"

If you're interested in different sizes let me know and I see what I can do.

Materials:

PLA should be fine in most cases (that's what I used). If exposed to high temperatures and/or UV you might want to switch to PETG, ABS or ASA.

Printing tips:

Designed to be printed with no support.

Standard settings should work fine, I usually print with 3 walls and adaptive cubic infill to be a bit stronger and save some material.

Credit:

Connectors created with: https://makerworld.com/en/makerlab/parametricModelMaker?designId=1719490&from=model_page&modelName=mount-anything-to-opengrid.scad&protected=true&unikey=1177996e-9567-434f-ac02-1a5fcdcaf3c8