Acmer AP220 Purifier Output adapter.
Print Profile(1)
Description
Even though the Acmer does a good job pulling smoke from the H2D, I wanted to pump it's output completely outside. The Acmer AP220 just has vents to output to so I designed an adapter to reduce it down to a 4in ventilation hose.
Can be attached with permanent double sided adhesive, or mounted with screws, or both.
For screw attachment you must drill the holes into the AP220. I have a template you can print to get them just right. I used 4x M4x10 screws and nuts/washers. For the bottom corner, you have to reach in through the 4in hole to hold the bolt while you tighten, or you could skip that screw probably if also using adhesive tape.
Check out my 4in Input adapter for the AP220!
Check out my latest designs by clicking here!
Boost Me (for free)
Enjoy my designs? Boost me so I can keep creating!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)