Search models, users, collections, and posts

Tesa Desk Tape Dispenser / Spare part

Viiitek
Household>Office
IP Report

Print Profile(2)

All
A1
X1 Carbon
P1S
P1P
X1
X1E
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
28 min
1 plate
4.2(27)
Resized for tesa 0.2mm layer, 2 walls, 15% infill
Resized for tesa 0.2mm layer, 2 walls, 15% infill
20 min
1 plate
4.7(15)
Open in Bambu Studio
Boost
57
155
57
8
564
394
Released 

Description

Content has been automatically translated.
Show original

Spare part for Tesa dispenser, if it is defective or lost.

 

Update from 2025-12-07: I have replaced the old files; the new ones now correspond to the real dimensions for a Tesa roll. For assembly, I recommend laying the roll down, pressing in the pin. Then rotate the roll and press it against the pin so that the rest of the part presses in.

 

Spare part for Tesa dispenser in case it is defective or has been lost.

Edit at 2025-12-07: I've replaced the old files; the new ones now correspond to the real dimensions for a Tesa roll. For assembly, I recommend laying the roll down, pressing in the pin, then rotating the roll and pressing it against the pin to secure the rest of the part.

office
office accessories
desk
bueroausstattung
tesa
tesafilm
adhesive tape
rolle
spare part
equipment
rollen halter
ersatzteile

Comment & Rating (57)

(0/1000)
@ALCUPA
relatively tight in the tape rolls, otherwise great 👍🏼 I re-drilled the hole in the shaft after printing
The designer has replied
Show original
0
Reply
@Viiitek
Yes, it was unfortunately created according to the dimensions found online A friend had accidentally disposed of it, which is why I googled and found the dimensions from the manufacturer
Show original
0
Reply
@MandM
Print Profile
Resized for tesa 0.2mm layer, 2 walls, 15% infill
passt perfekt. Danke
0
Reply
@Klaxxxon
Print Profile
0.2mm layer, 2 walls, 15% infill
I had to print this multiple times and adjust the size (4% smaller the roll and the pen 6% smaller and a few millimeters longer) Then it worked
Show original
0
Reply
@PrintRoot
Print Profile
0.2mm layer, 2 walls, 15% infill
the roll is too big, so that no tape roll fits on it
(Edited)
The profile uploader has replied
Show original
1
Reply
@Viiitek
It worked for me. Please calibrate the printer
Show original
0
Reply
@PrintRoot
your roll is 1.14mm bigger than the original roll I printed the whole thing in PETG, which tends to shrink. Meaning, in PLA the roll is probably even bigger. my printers are well calibrated. I printed the whole thing on both the H2C and the A1 mini, on both the model has the same size deviation
(Edited)
Show original
1
Reply
@user_2821652018
Thank you so much! Ive been lookig for this for ages and now that I have a 3D Printer I could finally fix this :D :D aweseome! The Version with 32mm is too large for most strip-rolls but the the original worked fine!
The designer has replied
0
Reply
@Viiitek
thank you too!!
0
Reply
@user_3465381023
The shaft of my stand is square and a little tapered Do you have a model like this Only the pin broke My stand is for larger tape rolls
(Edited)
The designer has replied
Show original
0
Reply
@Viiitek
Only this, sorry…
0
Reply
@Schecher_1
Print Profile
0.2mm layer, 2 walls, 15% infill
The pin was too small for my model and didn't fit into the roller at all After adjusting both parts it worked
Show original
1
Reply
@JuTi240715
Print Profile
0.2mm layer, 2 walls, 15% infill
The roll has become too thick; no tape will adhere
Show original
1
Reply
@user_4115274342
Print Profile
Resized for tesa 0.2mm layer, 2 walls, 15% infill
I had problems with bed adhesion
Show original
0
Reply
@JanSt
fits snugly, but it fits 👍🏻
Show original
0
Reply

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

Related Models

Stitch Multi Part
Stitch Multi Part
Pinpin
14.3 k
4.7 k
Money Bank
Money Bank
Benjamin Kott
12 k
1.8 k
Clamshell Parts Box
Clamshell Parts Box
Nick Johnson
23.3 k
8.4 k
Majin Buu Realistic Multi-Color Parted Statue
Majin Buu Realistic Multi-Color Parted Statue
AT62
12.2 k
6.8 k