SUNLU S4 – Heat-Lift Feet (35 mm Raise)
Print Profile(1)
Description
SUNLU S4 – Heat-Lift Feet (35 mm Raise)
These support feet were developed to prevent the common E3 error of the Sunlu S4. The error occurs when the bottom fan overheats due to the small distance from the surface. The feet raise the S4 by 35 mm, improve air circulation, and ensure that the dryer runs stably even at 70 °C – without interruptions
A major advantage
The feet are simply slipped onto the existing metal rods on the underside of the dryer. Nothing needs to be disassembled, no screws, no modification. Slip on – done
The model consists of two solid side feet and a central strut that is simply inserted. It is printable completely without supports, stable, and quickly manufactured
Printed in PETG (matte), 0.2 mm layer height
Print time: just under 2 hours • Material consumption: approx 50 g
Ideal for anyone who wants to operate their Sunlu S4 reliably and continuously at high temperatures
Boost Me (for free)
I would be absolutely thrilled about a boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)