Magnetic holder to safe for Gun registration card
Print Profile(1)
Description
This is a holder for firearm registration cards in the dimensions used in the Czech Republic (116×74 mm). It can be mounted inside a safe using 10×2 mm magnets. The holder can accommodate more than 20 cards, so a fully loaded safe is not an issue.
After printing, press two or four magnets into the slots. For just a few cards, two magnets are sufficient, but for around 20 cards, all four magnets are recommended. You can then attach the holder to the door or inner wall of your gun safe.
This is a holder for firearm registration cards in the dimensions used in the Czech Republic (116×74 mm). It can be mounted inside a safe using 10×2 mm magnets. The holder can accommodate more than 20 cards, so a fully loaded safe is not an issue.
After printing, press two or four magnets into it. For a few cards, two magnets are sufficient, but for about 20 cards, it is advisable to use all four. You can then attach the holder, for example, to the door or inner wall of your safe
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)