.270 Winchester Cartridge Clip - Free 3D Print Model

Search models, users, collections, and posts

KL.Design

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

X1 Carbon

P2S

P1P

H2S

H2C

H2D

X1E

H2D Pro

A1 mini

P1S

X2D

A2L

.270 Winchester Cartridge Clip

Designer

3.4 h

1 plate

4.9(20)

Open in Bambu Studio

Boost

229

269

175

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Matte Lemon Yellow (11400) / Refill / 1kg

PLA Matte

Description

.270 Winchester 5-Round Cartridge Clip

Looking for a specific caliber? Check out all the available clips here: https://makerworld.com/collections/14544472

I designed this cartridge clip for hunting — practical, refined, and made to last. Each round slides in with a crisp, satisfying sound and sits firmly in place without any rattle. It’s compact, easy to handle, and feels premium right from the first use.

To release a round, there’s an opening behind each slot so you can simply push it through from the back. The bottom includes a carefully placed cutout that keeps the primer clear, ensuring both safety and perfect fitment.

The caliber is printed on the bottom, and you can easily change the color to match your own setup or favorite theme.

Print it, make it yours — and if you try other colors or calibers, post a photo in the comments. I’d really enjoy seeing your take on it!

🤩 🫵 And please, like, rate and if you can boost my models, it helps me make more of them. Thanks! 🥳

Boost Me (for free)

Do you like my model? A boost is completely free for you, and you really help me a lot to create more models like this in the future. Thank you very much!

Membership

Earn by selling my models, sign up for a membership and get access to all my model (except those based on remixes).

Join

Comment & Rating (37)

@jgramlange

Printed in PLA and the retaining clips snapped right off when I push in at cartridge - What did I do wrong??

The designer has replied

@KLD.Sweden

You printed it laying flat. The wings will snap at the layerlines. You need to print it standing up using supports. Then the wings will hold.

@jgramlange

Replying to @KLD.Sweden :

Thank you so much! Of cause! That makes so much more sense 😅 Really great design!

@user_98667510

I do not understand, but fairly new to printing. A1 with AMS Lite. Tried to include a screen shot of the 3 errors I am getting from download - about the solid infill, sparse infill, and wall filament, and correcting them in the parameters - not sure why they are in error and where to fix. Also, not sure why there is a filament tower being printed - the 2 color is done in the first few layers, so it should be gone and not need a tower after the first few layers? (Actually after I slice without adjusting parameters the tower goes way down like I would expect!) Confused and trying to learn - thanks for any help! (And got a similar error on another caliber I wanted to print of yours.)

The designer has replied

@KLD.Sweden

Did you change to your own printer type? There's no issue with the profile itself. Make sure you've switched to your own printer type and then check the "advanced" button and make sure you have these settings under "strength". Good luck.

@user_98667510

Replying to @KLD.Sweden :

Appreciate the quick reply, first I uploaded the newest Bambu studio, no issues when I opened and sliced, fingers crossed for the print!

@user_1816818533

Print Profile

.270 Winchester Cartridge Clip

Beautiful design and fitment. I just need to get the m3 x 22 fasteners

@user_3732819792

would you be about to make these for 25-06 and clip holders for 357 and 38 special??????

The designer has replied

@KLD.Sweden

357 and 38 Special are already there.

@user_3732819792

I meant for the 357 and the 38 special the boxes you have listed for other calibers that holds the 5 shot clips for them you have listed for other calibers….by the way thank you I have made both the 5 shell clips for them!

@user_3824406944

why PLA but not PETG ?, PETG has more flexibility than PLA , more heat tolarance , just wondering, is there a reason?

The designer has replied

@KLD.Sweden

PLA works fine, and has a more pleasant look. Most people print with PLA. PETG is fine too. So if you like that more just go for it. 👍🏻

@user_3824406944

Replying to @KLD.Sweden :

thanks for your answer, can’t wait to try it

@Whitesjay

Boosted

Nice design! I printed several different calibers.

The designer has replied

@KLD.Sweden

Thanks, I’m happy you like them and extra thanks for the boost! I really appreciate it.

@crashm87

Boosted

Thank you quick turn around !

The designer has replied

@KLD.Sweden

You are most welcome, thanks for all the boosts!!

(Edited)

@user_1259438140

Print Profile

.270 Winchester Cartridge Clip

I had to file the model a bit with sandpaper, the cartridges were too difficult to insert, and removal was too strenuous. I filed it a little and now everything works great

The profile uploader has replied

Show original

@KLD.Sweden

tolerances are tight, flow calibrated filament is needed to not have to file.

@user_2645105759

Print Profile

.270 Winchester Cartridge Clip

It's a great print.

@Printpanda33

Print Profile

.270 Winchester Cartridge Clip

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Filament Clip

LightBulb

70.3 k

11.5 k

Filament Clip

idea Lab

19.3 k

3.2 k

Bag Closure Clips

mail.iou

35.7 k

5.2 k

Filament clip for Bambu lab spool

Anders Tech & 3D

22.7 k

4.3 k