4080 Sim Rig Center Console
Print Profile(1)
Description
This is a 4 part print for a center console designed for a 4080 aluminum profile sim rig. Print with supports and I recommend using adaptive/quality settings for the trim pieces. I put the trim on the same plate as the piece it relates to so you know which goes to which, but you can print them separately if you want.
The console requires a frame to be built out of 4080 or 4040 aluminum and is configured for m8 bolts. I believe the middle piece requires m8 x 25 bolts but the rest will use m8 x 20.
Use this shifter boot (https://www.amazon.ca/dp/B0DG4JG4Q3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1) if you like. Drill pilot holes into the areas marked with the red dots in the attached photo and screw the shifter in with m5 bolts.
The circular piece goes around the shifter hole. You may need to make modifications to your shifter mount to make it work with your setup. I use the BDH shifter. I take no responsibility for any issues that arise out of printing or using this design.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)