Cantilever spool holder with silica gel container
Print Profile(1)
Description
This is a simple spool holder to hang on the wall or on a shelf, as I did.
It's designed to accommodate spools up to approximately 200 mm in diameter, and inside it has a silica gel container.
It is fixed with 3 screws, so there are 3 holes available in the main body, but if you have special needs, let me know and I will add or remove them.
The door closes with magnets, so you will need approximately 20 magnets 4x2 mm.
Also, to complete the job, you will need an M4x16 mm countersunk screw to thread the threaded insert of the spool holder pin.
The silica gel container should be printed lying on the side where the threaded cap hole is and should be printed WITHOUT supports. I suggest doing it in ABS; it comes out well, and you can regenerate the silica in the oven without worries.
The lid gasket is optional and should, of course, be printed in TPU.
The main body and lid in PLA are perfectly fine.
If you have questions or doubts, feel free to ask.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)