SAEKO (High School of the Dead) - Free 3D Print Model

Search models, users, collections, and posts

benito valentin

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2S

X1 Carbon

A1 mini

P1P

X1E

P2S

H2C

H2D Pro

H2D

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

2.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: saeko.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 80.68x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA BambuLab Matte Latte Brown Transmission Distance: 2
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #6 (0.56mm) swap to Army Blue
    At layer #10 (0.88mm) swap to Latte Brown
    At layer #13 (1.12mm) swap to Sakura Pink
    At layer #16 (1.36mm) swap to Lilac Purple
    At layer #21 (1.76mm) swap to Beige
    At layer #24 (2mm) swap to Jade White for the rest.