Ratchet Winder for Lashing Strap with Ratchet
Print Profile(1)
Description
With the ratchet winder, the strap can be wound onto the ratchet and stored with the accessories so that the strap does not unwind again.
For assembly, you need:
9x M3 x 6mm screws (ideally pan head)
9x Heat set inserts M3x5.7x4.6
1x 608rs bearing (8mm x 22mm x 7mm)
1x Washer for M3 screw
Optionally lubricant for better handling (e.g. Super Lube)
For each ratchet, a pair of accessories is required (print plate 5 - 2-piece set and 6 - 1-piece set).
The orientation of the printed parts is deliberately chosen this way because it provides the best durability and stability for the parts.
The hand crank achieves better durability when printed lying down!!! If printed standing up, the crank can break very quickly at the bearing!!!
The pins also achieve better durability due to their chosen placement on the print plate!!!
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)