H2 Series Buffer PTFE Tube Removal Tool

UPDATED VERSION 1/2/25 - Added multiple options; GOOD, BETTER, & BEST.

Look for the plate labels indicating Good, better & best and print your choice.

    Good - print the handles in PLA, the tool arms and hinge shims in PETG.

    Better - print the handles in PLA, print the better hinge shim in TPU 95AHF, and tool arms in PETG.

    Best - print the one-piece handles in TPU for AMS, and the tool arms in PETG. No hinge shims required.

The same plate of tool arms work for all the handle options. 

_______________________________________________________________________________________________

H2D Buffer PTFE Tube Removal Tool - make removal of the PTFE tube from the H2D Buffer a quick simple process, as seen on Lukis3d Studio channel: 10 More BEST Upgrades for Bambu Lab H2-Series Printer - YouTube.

The tool has a blunt side that holds the buffer slide to the right while the left side applies pressure to the locking ring. 

With a little pressure applied pull the tube out.

Assembly: Test fit the tool ends into the handle pieces. They may hold without any glue needed. If not add a few drops of super glue into the handle openings without using accelerator.

The thin PETG springs side into the slots in the handles. I prefer layering those with the narrower one toward the inside of the tool; making the hold tight without glue. If you leave it unglued you can replace parts if it should wear out over time.