STORCH Handle for Alustar Spatula 2nd Gen / 3rd Gen

This handle is compatible with the STORCH Alustar finishing spatulas of the 2nd and 3rd generation.

For the 3rd generation (black spatulas), only the TPU variant fits!

The TPU variant is deliberately designed to be slightly larger, as it needs to be attached with double-sided tape.

The advantage, however, is that TPU does not break when dropped.

For larger spatulas, I would recommend using the PETG or PLA version for central mounting on the spatula. ABS etc. is also possible.

These variants are designed to fit firmly on the spatula and be removable. This allows you to attach the connector for telescopic handles at any time.

The first and second print plates fully equip the 2nd generation spatula set with handles.

40cm Width : 2x 15cm TPU handle

60cm Width : 2x 16cm TPU 1x 16cm PETG

80cm Width : 2x 16cm TPU 1x 16cm PETG