Search models, users, collections, and posts
Ιmpatient Metabee
IP Report
This model is created by Image to Keychain
Make Your Model
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
3
8
0
0
2
0
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Medabots – Medabee
This model has been adapted for reliable FDM printing.
The lines remain clean and well-defined even at a smaller scale.
For maximum detail, a 0.2mm nozzle is recommended.
I printed mine with a 0.4mm nozzle and still achieved a solid, clean result. On a Bambu A1, ironing performs well around 50 speed and 40 flow, but feel free to adjust these values to suit your own setup.
The size I chose for my print is 50 mm in height and 3 mm in thickness, which makes it ideal for a keychain.
The surfaces are prepared for an easy print and a polished final outcome.
Boost Me (for free)
If you enjoy this model, consider hitting the Boost button. It helps me share more new designs to the Makers Lab.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (0)