Large Parrot (Nausicaä) The front moves vertically and the back should move slightly horizontally

Hello, I think the eye hemispheres will glow beautifully when an LED is inserted if printed with PETG clear (I forgot to include the LED cap)

If you don't have the skill to recover from assembly issues, you might want to avoid this project as materials could be wasted

I struggled with the assembly myself

Improvements to the data are currently under consideration

Good luck with the painting as well

Thank you

Note: On the first plate, the abdomen part and joints 1 to 4 are articulated. If you change the scale, I think they will join internally and become immobile

For assembly, firmly join the upper and lower parts of joints 1-4 with hot glue or adhesive, install lighting in the eyes and glue them, too, extending a longer wire to the rear

Using the upper and lower connectors, connect joints 5 and beyond in a ring state, glued top and bottom

Towards the end, the tail's opening might be small for inserting the connector so please do your best

Perhaps the tail uses hot glue

As you can see, once assembled, it's a structure that's difficult to undo so please be careful

Reference Video