NSG3Dprinting

cover

1 watermark.jpg

1b watermark.jpg

2 watermark.jpg

2b watermark.jpg

Lid with Battery Icon

plate_1.png

Blank Lid

plate_2.png

Latches

plate_3.png

Box Bottom

plate_4.png

Insert

plate_5.png

Optional Gasket

plate_6.png

v1.1 has slightly larger holes for the AA batteries to accommodate brands with thicker labels

XL Battery Box for AAA, AA, 9v batteries v1.1

*NOTE* The bottom of this box is the same as the AA &amp; AAA box, but the lid is taller so you cannot use the insert in the other box without printing a new lid.&nbsp;v1.1 has a taller insert to hold batteries in place better, everything else is the same

XL Battery Box for C and D batteries with taller lid v1.1

Insert for CR2016 to CR2032 batteries

CR1.jpg

CR2.jpg

Removable module that has:<ul><li>(9) 2mm slots for up to CR2016 batteries</li><li>(12) 4mm slots for up to CR2032 batteries</li></ul>

Module insert for CR2016, CR2020, CR2025 CR2032 batteries

D to AA adapter

C to AAA adapter

D to AA and C to AAA adapters jpg.jpg

If you would like to store some AA or AAA batteries in available D or C battery slots, you can print these adapters.&nbsp;<ul><li>D battery adapter allows 3 AA batteries to be stored in place of 1 D battery</li><li>C battery adapter allows 3 AAA batteries to be stored in place of 1 C battery</li></ul>

Adapters D to AA and C to AAA batteries

insert AA.jpg

Insert AA.png

This insert can be printed instead of the standard one for AAA+AA+9v batteries to store only AA batteries

Insert for AA batteries only.  Holds 117 AA batteries.

insert AAA.jpg

Insert AAA.png

This insert can be printed instead of the standard one for AAA+AA+9v batteries to store only AAA batteries

Insert for AAA batteries only.  Holds 187 AAA batteries

insert 9v.jpg

Insert 9v.png

This insert can be printed instead of the standard one for AAA+AA+9v batteries to store only 9v batteries

Insert for 9v batteries only.  Holds 50 9v batteries

XxRagdollxX

1000185343.jpg

Angepasst auf 2032 und LR44 Knopfzellen

Adapted for 2032 and LR44 button cells

Module insert adapted for 2032 and LR44 button cells

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Love what you see? A quick boost keeps designs like this rolling out fast!  If you don&#39;t have a boost to give, you can still rate the model and share a pic of what colors you chose!</boostcontent></boostme>The best thing about Christmas?  The look on the kids&#39; faces when they get that gift they were hoping for!  Don&#39;t ruin the moment by not having enough batteries on hand!  &nbsp;This box is large enough to store up to:<ul><li>45 AA</li><li>48 AAA</li><li>10 9v batteries</li></ul>There is even a small area for some storing other things like odd sized batteries, etc.&nbsp;This model doesn&#39;t require an AMS unless you&#39;re printing the lid that has the battery icon on it.  If you&#39;re printing the blank lid instead, this can all be done without an AMS!  &nbsp;The insert will lock in pretty tight without the need for glue.  &nbsp;The hinges and latches use a total of <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1169620">six (6) M3x30 screws</a>.&nbsp;There are a total of 6 plates.<ul><li>Plates 1 &amp; 2 are both lid options, you only need to print the one you want<ul><li>Plate 1 is the lid <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1169620">with</a> the battery icon (AMS required)</li><li>Plate 2 is the lid without the battery icon (no AMS requried)</li></ul></li><li>Plate 3 has the latches by themselves.  This is only to allow you to choose a color when printing from a phone.  If you want to print them the same color as the box or the insert, you can move them to one of those plates on a PC</li><li>Plate 4 is the bottom of the box</li><li>Plate 5 is the insert that will go into the bottom of the box</li><li>Plate 6 is a TPU gasket that is completely optional.  If you want the box to seal up a little better, you can print that, otherwise you don&#39;t need to.</li></ul>&nbsp;

Print Profile(8)

Bill of Materials

Description

Comment & Rating (159)

License