GoveeLife leak detector H5059 Mounting Bracket

This mounting bracket is for a GoveeLife Water Leak Detector H5059.

I do not actually Have one of these, I made this for a friend according to how he wanted it for his RV.

He wanted a simple design that he never had to unscrew and just use a zip-tie. It worked Great.

It is for this https://www.amazon.com/dp/B0DQLFC3Q6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

,

I designed this so after you have it screwed down in place, when you snug up the zip-tie, it will gently bring the walls in to snug up on each other to hold detector in place while traveling down the road.

The outer walls of the detector are slightly tapered, So I am letting the walls of the bracket to flex against the detector to hold in place, and to change batteries, just cut the zip-tie and lift out.

I made these out of PLA, But if you are going to be putting these in a place that get really warm or Hot, You may want to go with ABS or ASA.

petG at the very least.

But, If you camp like my Buddy does, you shouldn't have any problems with any material choice you make. His wife is a camper, He is a Glamper.

I hope you enjoy it, If you do please give me a thumbs up.

Have a Blessed Day