Headrest Snow Brush Holder (Customizable)

Tired of your snow brush rattling around in your car, hard to reach when you need it?

This is my solution for storing my snow brush conveniently, mounted directly onto my car's headrest.

I originally designed this holder to fit my Hyundai Ioniq 5, but since most cars have different headrests, I have made it fully customizable here on MakerWorld!

📐 Customize Your Print with 4 Simple Values

You can adjust the print by changing the following four key values:

• Headrest Pin Diameter:
  • Measure the diameter of the metal pins (mine were, for example, 14 mm, so I used 14.2 mm for a good fit).
• C/C distance between the Pins:
  • Measure the center-to-center distance (C/C) between the pins' midpoints and enter that value.
• Tool Holder Diameter:
  • Change the diameter so that your brush fits. My brush is 25 mm, which provides a good grip/clamp.
• Distance from the Pins to the Tool Holder:
  • You can adjust how far from the headrest pins the holder should be located. Try to place it as close to the seat as possible for the best fit.