Radio PRC/TRI-148 6pin to 10pin adaptor

This adaptor will make it possible to use the 10 pin connector from a TEA universal PTT in your TRI-148 6 pin radio and convert it to a 10 pin.

The nut from the connector is a press fit into the adaptor, and the tolerance between the adaptor and radio is tight.

should you have problem, try and scale the model +/- 1% or edit the model in the included Freecad file.

I don't have a guide on the wiring yet, but included the pin out of both connectors. 

You should NOT need to remove the front pcb for this mod, with a bit of luck and a tweezer you should be able to connect the new connector back on the backside of the PCB board

Items need:

• TEA Universial PTT
• PCB connector 
  • 1 x JST 1.25 6pin connector OR 1 x JST 1.25 6pin pigtail