Reverb G2 head strap fix
Print Profile(1)
Description
The head strap fixation on my Reverb G2 broke, so here is an easy-to-print quick fix, as the official spare part is nowhere found…
It can be secured with a small overlapping piece of duct tape on the top, but on my headset it's not required.
Prerequiste:
You'll need to “trim” the broken old fixation, the horizontal part (the fragile one) must be gone at 100%.
Tested printing settings:
tested on: BambuLab P1P
material: matte PLA but ABS will be fine too if you can print it
raft: yes
supports: yes (std supports, >40°)
layer: 0.12mm but you can go higher
infill: honeycomb/gyroid 50% and it seems solid
With these settings, it takes 40min to print and uses 9g of PLA
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)