Fast to Print. Cheap to Build. Smarter RC Track

New version customizable here : Customizable RC Track, Fast and cheap to Build

If the proposed sizes don’t fit your needs, you can either scale the model uniformly by adjusting the percentage, or request a custom size in the comments.

Important — Read Before Printing

Before starting any large batch of prints, make sure to print the test piece first.
This quick test will confirm that the hole dimensions of the printed parts match the exact thickness of the wood you plan to use for the side borders.

Description

This RC track system is designed to minimize print time and material use. The outer borders are made from wood instead of plastic, drastically reducing the amount of filament required while keeping the build sturdy and affordable.

The dimensions of each module are based on either standard 1” x 1” wood or the MicroPro Sienna product (Canada), ensuring that the wooden borders fit perfectly with the printed pieces. If you need additional standard sizes or variations, feel free to contact me — I’m happy to add more dimensions to the print profile so you can customize your track setup

The dimensions of each module are based on the following product, ensuring that the wooden borders fit perfectly with the printed pieces. If you need additional standard sizes or variations, feel free to contact me — I’m happy to add more dimensions to the print profile so you can customize your track setup.