P2S Riser Extender/P1S LED Air Vent Glass Riser V2 - Free 3D Print Model

Search models, users, collections, and posts

ENVY3D

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

H2D

P2S

H2S

H2D Pro

X1E

X1 Carbon

H2C

A1 mini

P1P

X2D

A2L

0.2mm layer, 3 walls, 7% infill

Designer

36 min

1 plate

4.9(19)

Open in Bambu Studio

Boost

135

434

393

Released

Description

Hey guys, I had someone reach out to me to let me know that my P1S LED Riser did not fit the P2S series (top is a little longer than the P1S). I have created an extender to now allow the riser to fit perfectly on the P2S, So if you have a P1S with my riser and want to have your P2S matching or don't like having the door open or top glass off when printing PLA or any other materials that require air flow, well, this riser will be a great addition to your printer allowing you to have them closed and not have to worry about the airflow as the vents let out the right amount every time.

The standard light bar not bright enough and want to run LED's? well, there is a channel designed just for that!

I have labelled them with L and R so you don't get mixed up on which one goes which side,

This extender only works with the P1S LED Air Vent Glass Riser Version 2! Link below.

Link to my P1S riser here - https://makerworld.com/en/models/504518-p1s-led-air-vent-glass-riser-v2#profileId-420165

Big thanks to @Audrey_1981 for reaching out and working with me to find a solution.

Boost Me (for free)

If you like my models please help support me, Thank you :)

Comment & Rating (51)

@kfm_3d

Boosted

Came out great on my X2D, thank you

The designer has replied

@ENVY3D

that did come out great! looks awesome in the 2 colours 👌🏼

@kfm_3d

Boosted

Replying to @ENVY3D :

Transparent red and dark gray to match the printer. Going to be my color theme moving forward. PS - LED's are coming soon. trying to figure out the corners with some Cob LED's

@ENVY3D

Replying to @kfm_3d :

yeah awesome colour combo, one of my favourites! LEDs run on the 45° angle I’ve put around the top of the riser, if need be, chuck some glue on the back of them and they will never drop off

@NerdLootCo

I’m at a loss- new to printing and I’ve had this happen 3 times on this specific print using my P2S. Any insight? I’ve cleaned the bed between prints and I ran a test print prior and had it complete successfully.

The designer has replied

@ENVY3D

can you double check the meterial you are using and make sure it is not the support filament, did the tool head go to the back because it detected the poop or are you using or have you got Timelapse turned on? if you do, that could be your issue, it may not wiping the nozzle properly when going back to the print after taking a photo? other than those 2 things, I have no idea

@NerdLootCo

Replying to @ENVY3D :

I’m unsure of what you mean by support filament, but I’m using PLA. I don’t believe timelapse was going, but I’m assuming so as I do have a usb drive in so I’ll test it without timelapse. thank you!

@NerdLootCo

Replying to @ENVY3D :

safe to say timelapse was likely the culprit- thank you again! I can’t wait to print the riser!

@AnnieCH

Print Profile

0.2mm layer, 3 walls, 7% infill

The profile uploader has replied

@ENVY3D

the black looks really good on the p2s, great choice 👌🏼

@AnnieCH

Replying to @ENVY3D :

Bambu Lab Sparkle Slate Grey and from layer 168 Anycubic Black

Show original

@ENVY3D

ahh didn’t see the 2 colours, looks awesome 👌🏼

@macksmarket

do I print only two of these extenders and two of the other connectors for this to work with p2s?

The designer has replied

@ENVY3D

yes correct, there is 2 extenders on the plate already, and then for the ones with the riser, you want to print the short 1 and 1 of the taller ones, or can just print them all and get rid of the other 2 once done, they don’t use much filament anyways

@macksmarket

thank you!

@Chief17

Boosted

Replying to @ENVY3D :

Do you typically glue these together? And, why the depression in the front? First rate design by the way. I've found that an Outside Brim setting of 10 will keep them from falling over and serving an extra helping of spaghetti. Ask me how I know.

(Edited)

@DaveyWave

Compeltely off topic but dang.... Seeing 2 P1S's, a X1C, and a P2S. Im mad jealous, I just got a P1S not long ago and that was maxing out what I was able to spend on a printer. Just ordered a AMS late Novemeber and just got it Friday which broke my mind how much it was also.

The designer has replied

@ENVY3D

Oh I'm jealous too haha, these aren't mine, I had someone print and send me photos of the riser extender because I don't have a p2s haha. Nah don't worry if that's all you could get atm, I started off with a p1p, then about 6 months later got a p1s by itself with the money I made from selling prints, sold the p1p and brought a p1s combo 3 months after and also brought a ams a few months after that, I ended up selling both printers because we left the house we were in to travel, now that we're in a house I've now got a p1s combo with the coins I have gotten from my models on here which is bloody awesome! TIP - create a few models and hope 1 or all become popular, use the coins you get from them to supply your filament needs, (that's what I do), start selling prints and put all that money away and just start saving for your next printer. :)

@Tobiiiiii3D

don't forget there are many where they do it commercially and you won't get far with one printer

Show original

@Acsteward26

I love this riser on my P2S! Any chance you have found a TPU spool holder that fits on the top?

The designer has replied

@ENVY3D

hey thank you 👌🏼 unfortunately I haven’t looked into that as I don’t print with tpu, sorry

@user_1091200793

I can’t seem to get the front pices to print without drooping when filament is bridging the gaps any advise ?

The designer has replied

@ENVY3D

what version riser are you printing? if you print version 2, you won’t have that issue, also, if you are printing it for a p2s, you will need the version 2 for these extenders to work, they don’t work on version 1

@Jerrilyn

will this not work with just a P1S printer?

The designer has replied

@ENVY3D

grab the p1s v2 that’s on my profile, this is only an extender to make the riser fit on a p2s, p2s is different in length by a few mm

@user_270489657

anyway you can make a file just for the p2s for those who have never printed the previous p1s riser and want to avoid the extender? :)

The designer has replied

@ENVY3D

yeah I will look into it, but I will need someone to do some test prints and also get photos aswell for me as I don’t have a p2s, if your up for helping out, shoot me a message and we’ll go from there. thanks

@Bronxny190

The Extrender Doesn’t Fit the P1S riser. so it still doesn’t work for the P2S ;(

The designer has replied

@ENVY3D

it works with the version 2 of the p1s riser, got photos that it doesn’t fit?

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.