Jetpac Sinclair ZX Spectrum Ultimate Play the Game

Hi again. These prints are like buses, nothing for a long time, then… 

Here we have three variants of the seminal Jetpac's loading screen. As with my Atic Atac version, these three versions should cover most eventualities: -

1./ 8 colour (by layers) - for those, like me, with just one AMS. Achieved with the help of two automated pauses and some swapping of filaments. Instructions below;

2./ Mono - for those less fortunate, but happy to have something rather than nothing, or willing to paint it perhaps. Having said that, it reminds me of the gold old days and that slight pause as the picture had been built up but wasn't yet coloured-in. Ah - that old familiar noise…;

3./ 8 colour (by layers) - for those lucky enough to possess two AMS units (or more, or perhaps an “Ultimate” [pun intended] H2C?).

Each of the above fits into my loading screen frames (see other listing) and can be scaled to fit the bigger frame if you prefer.

Instructions for variant “1” above, which looks weird when you open the file, but it works. - Have faith… 

Start the print with black, magenta, red and blue (not cyan) filaments in any of the slots on your AMS (order is not important) There are automated pauses, the first after approx.3hrs23m and the second after approx.4h47m, at which point you need to do the following: -

Layer 40 pause - Replace the black spool with green and replace the blue spool with cyan. Restart once done.

Layer 60 pause - Replace the red spool with yellow and replace the magenta spool with white. Restart once done.

Hopefully that all makes sense. Please message me if not.

More on the way, but that's it for now. - Thanks for looking in. Enjoy!