Snapmaker U1 Top Cover Modding for IKEA SAMLA 45L - Free 3D Print Model

Search models, users, collections, and posts

Beaver Works

3D Printer>3D Printer Accessories

IP Report

Print Profile(11)

All

P2S

H2D

H2C

H2S

H2D Pro

X2D

A2L

X1 Carbon

P1S

P1P

X1E

A1 mini

No Cable disconnecting, 0.2mm layer, 2 walls, 15% infill

Designer

18.6 h

7 plates

5.0(143)

Original Version, 0.2mm layer, 2 walls, 15% infill

Designer

18.7 h

7 plates

5.0(15)

Under Rear Fully Sealed Fixed + No Disconnecting

4.5 h

2 plates

5.0(22)

Compatible P1S - 0.2mm layer, 2 walls, 15% infill

16.7 h

7 plates

4.8(13)

Click to see more

Open in Bambu Studio

Boost

1448

2691

524

473

7.1 k

1.8 k

Released

Bill of Materials

List other parts

IKEA SAMLA 57x39x28 cm/45L x 1: https://www.ikea.com/kr/en/p/samla-box-with-lid-transparent-s39440767/

Description

The official Snapmaker top cover costs a whopping $249... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create this model!

This is a connector that lets you upgrade the IKEA SAMLA 45L storage box into the (unofficial, but effective) top cover for your Snapmaker U1.

The best part is that no additional parts like screws or bolts are needed for assembly! (Although, using adhesive is recommended for better stability.)

With this budget-friendly cover, you can effectively block noise and dust from your printer and get the added heat retention benefit from maintaining the internal temperature.

Assembly Tip: You will need to disconnect the PTFE tube and the USB-C cable during installation. It's much easier if you detach the cables near the tool head before you begin assembly!

11/25 Note: Replaced the stl files with the step files. Feel free to modify and create your own custom mods:) Also expecting that you guys adding profiles of any other boxes around the world!